Royal Enfield RAE00826/B is the CONTROL PLATE, RHa genuine OEM right-hand control/side plate used in the rider foot control area (mounting/support bracket near the RH side controls, depending on the sub-assembly). This is a high-demand part because once it bends (tip-over impact), cracks, or gets misaligned, it can cause poor control alignment, vibration, or improper mounting of related foot-control hardware. OEM matters here: correct gauge, hole geometry, and mounting accuracy are what prevent recurring fitment issues and repeat failures.

Also searched as: RAE00826/B control plate RH, RH control plate bracket Himalayan 450, right side control plate Royal Enfield, foot control mounting plate RH.

Before you buy: verify by part number on your old part, and confirm by photo match (holes/bends/finish) + VIN/EPC checkdo not assume cross-fitment across platforms.

Key Features

• Genuine Royal Enfield spare: RAE00826/B (CONTROL PLATE, RH).

• Right-hand (RH) side plate/bracket for rider-side control area (mounting accuracy critical).

• Restores correct alignment after bending/impact damage (common in tip-overs).

• OEM-spec metal thickness, holes, and geometry for proper bolt-up and durability.

• Helps prevent uneven control feel caused by misalignment (binding/incorrect positioning).

• Direct replacement part when the original plate is cracked, bent, or stripped at mounting points.

• Best for workshops: consistent OEM tolerance reduces rework and returns.

Compatibility Table

Explicit exclusions (return-prevention): Do not assume fitment for Classic 350, Meteor 350, Hunter 350, 650 Twins, or Himalayan 411/Scram 411 unless your EPC/VIN confirms the same part number.

Variants
No variants (RH-only part number RAE00826/B).

FAQs

Q1 (Fitment): How do I confirm this is correct for my Himalayan 450?
Match your removed parts stamping/label to RAE00826/B, then confirm by photo match (hole positions, bends, finish) and ideally VIN-based EPC lookup before ordering.

Q2 (Fitment): Can this fit other Royal Enfield models too?
Do not assume. Public listings confirm the part name/number, but do not reliably publish a model-fitment list. Order only when your EPC/VIN or old-part number confirms RAE00826/B.

Q3 (Comparison): Why choose OEM RAE00826/B instead of aftermarket plates?
This parts geometry directly affects mounting alignment. OEM ensures factory-spec hole spacing and thickness; aftermarket mismatches can cause misalignment, fastener stress, and repeat failures.

Q4 (Installation): Any installation precautions?
Use correct torque, check for frame/foot-control alignment before tightening, and inspect adjacent bushes/fasteners for damage after an impact. If the plate bent once, verify the mating brackets are not twisted.

Q5 (Symptoms): What issues does a damaged RH control plate cause?
Typical signs include misaligned mounting points, abnormal vibration, uneven control feel, hardware not sitting flush, or repeated loosening after a fall.

Q6 (Returns-prevention): What photo should I share before ordering?
Send a clear photo of your old part (front/back) showing all holes, bends, and any stamped codes, plus one photo of the mounting location on the bike. This prevents wrong ordering when multiple plates look similar.